News
Fluid Conductive Gaskets
Introduction
It is in chemical installations where hazardous fluids are transported by means of pipe lines. In the assembly of these, a series of preventive measures must be followed to avoid leaks, such as ensuring that the connections are kept to a minimum and that the pipe sections when they...
QUALITY CONTROL DIMENSIONAL AND GEOMETRICAL TOLERANCE.
Procedure for the verification of tolerances
Once the manufacture of any part in the workshop has been completed, it is necessary to check that its dimensions comply with the tolerances specified in the drawings. There are two ways of verifying the dimensional tolerances of any part:
- Indirect...
Plastic Oil Drain Plug. Oil Drain Plugs
WE HAVE IN STOCK ALL THE OIL DRAIN PLUGS FOR VEHICLES, BOTH PLASTIC AND METAL, IF YOU NEED A QUOTATION YOU CAN DO SO BY CLICKING HERE.
First of all let us explain a little about this subject and bring you up to date on this subject and...
Seals for aeronautics- Military Standards O-Rings.
Seals are used to prevent fluids from passing through a specific point, as well as to prevent air and dirt from entering the system where they are used. The increasing use of hydraulics and pneumatics in aircraft systems has created the need for washers...
We are on Metoree
Hello,
We are happy that our professionally produced products have been introduced on Metoree website.
Metoree is an industrial product comparison site for engineers and researchers, which features more than 250 categories including Washers, Hylomar and O-rings.
DIN 7603 Wholesale.
Sealing Rings In contrast to actual practice in standards published by the International Organization for Standardization (ISO), a comma has been used as the decimal marker. Introduction This Standard has been prepared by the Piping and Pressure Recipients Standards Committee. Amendments This Standard differs from the November 1994 edition as...